EasySync S1-A-7001 Guide de l'utilisateur télécharger pdf (Page 12)

Document Reference No.: ES_000008

S1-A-7001 RS232 to 1-Port CANbus Adapter User Guide

Version 1.2

Clearance No.: ES #03

4.1.3 Set UART Baud Rate (U)

Summary

Configure RS232 interface with a chosen baud rate. This rate is independent of the CANbus baud

rate. The RS232 baud rate is stored and retained across power cycles.

Upon power-up or reset (R) of the S1-A-7001, the RED LED will flash a given number of times.

NOTE: Ensure the attached RS232 device can be configured for the new baud rate prior to using

this command. Failure to do so may result in an unusable configuration. Many terminal

programs do not have settings beyond 115.2Kbps. The 1.0Mbps setting cannot be used with a

COM port set to 921.6Kbps.

Definition

Urate_selector<CR>

Parameters LED Flash on Power-Up / Reset

rate_selector = 0 = 230.4Kbps 1

1 = 115.2Kbps 2

2 = 57.6Kbps (default) 3

3 = 38.4Kbps 4

4 = 19.2Kbps 5

5 = 9.6Kbps 6

6 = 2.4Kbps 7

7 = 460.8Kbps 8

8 = 1.0Mbps 9

Remarks

Example:

U5<CR>

Set RS232 transmission rate to 9.6Kbps

Return Codes

<CR> = OK

<BELL> = ERROR

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 38 39

Pas de commentaire

EasySync S1-A-7001 Guide de l'utilisateur Page 12